- 电压击穿试验仪
- 介电常数
- 电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 落球回弹试验仪,介电击穿强度测定仪:电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
- 受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
多功能压力测量系统
-
落球回弹试验仪,介电击穿强度测定仪:粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
氧化铝流动角测定仪
-
塑料表观密度测试仪
-
普通磨料堆积密度仪
-
白土堆积密度测定仪
-
氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
落球回弹试验仪,介电击穿强度测定仪:陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高直流电压小电压电流检验仪(耐弧光检验仪)-(来计算机系统控制)
High voltage low current tester (arc resistance tester) - (computer control)
设备分类:耐电弧试验机
Product name: electric arc resistance tester
厂品机型:NDH-A
Product model: NDH - A
充分考虑条件:GB/T 1411-2002《固态耐压装修材料耐高压得很低的电流大小脉冲释放电能的实验设计》(同等IEC 61621-1997)及ASTM D495等条件的的标准设置制作业的,并具备IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
一般使用范围内及职能:
本实验室检测机是按适用以伺服电机、物品产品和生活费物品产品等服务行业的电焊工用涂料、环氧树脂涂料胶和隔绝漆等隔绝涂料的耐脉冲耐热性评审,主用以物质隔绝涂料如:涂料、bopp薄膜、环氧树脂涂料、矿石、淘瓷、安全玻璃、隔绝油、隔绝漆、瓦楞纸等媒介的耐脉冲耐热性试验;
本研究室报告设计机由求算机把控好程序运行,也可以体现当前工作状况研究室报告方式及研究室报告的时间,研究室报告终结后并留存当前工作状况研究室报告大数据,并可打印机.细则试验该报告。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该机为左右内置式节构,下端为操作流程系统化,顶部为实验室检测箱。
2 本产品设备利用*新智力调节技能,经由考虑系统软件(IEC或ASTM)可系统自动通过耐压,并在计算机上界面显示测试历程和结果显示。
3 **耐腐蚀性充分,抗串扰效率强,各种测试高精准度就越高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 电弧焊接通断时间间隔出现偏差的原因:乘以 ±10ms
2 调压器存储容量:2kVA
3 額定实验电压值:12.5kV
4 试验报告电流值的精密度:±3%
5 电压把握精密度:±10% 瞬时电流衡量表面粗糙度:1.5%
6 参比电极对样品有压力:(0.5±0.05)N
7 电极片的原材料:钨棒
8 电级距:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 用到生态湿度:(23±2)℃
10 采用周围环境环境温度:(50±5)%
11 电源模块:220V±5% 50Hz
12 冲击试验 手段: 国际标准/美标/10 mA 累计/20 mA 间隔/30 mA连续性/40 mA间断性
13 试验台执行程序正确:
| 源程序段 | 电弧焊接瞬时电流 mA | 弧光通断时段s | 各小程序段持续性日期s | 做实验的时候总周期s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 多次通 | 60 | 240 | |
| 5 | 20 | 持续通 | 60 | 300 | |
| 6 | 30 | 连继通 | 60 | 360 | |
| 7 | 40 | 不断通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 编号 | 简称 | 数量统计 | 注 |
| 01 | 耐电弧放电测试方法仪 | 两台 | |
| 02 | 电极片设备 | 一项 | |
| 03 | 电级支架 | 几套 | |
| 04 | 供电电线 | 一系列 | |
| 05 | 与地面放** | 一个 | |
| 06 | 感应电流毫安表 | 一套 | |
| 07 | 线上测控手机软件 | 有一套 | |
| 08 | 坯料架 | 两支 | |
| 09 | 金属电极时间标准单位块 | 2块 | |
| 10 | 方向的标准块 | 2块 | |
| 11 | 瓷质片 | 2片 | |
| 12 | 喷墨网页针式打印机 | 1台 | 国际品牌 |
| 13 | 统计机 | 1台 | 的品牌 |
| 14 | 选择阐明书 | 1份 | |
| 15 | 适合证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 货品具体型号:
NDH-A 耐弧光疲劳试验仪-微机操控
NDH-B 耐电弧焊接疲劳试验仪-手触屏把控好
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!